Daikin Siesta ATXF50A2V1B - 4 Before Operation; Overview: before Operation; To Fix the User Interface to the Wall; To Insert the Batteries

4 | Before operation
User reference guide
13
ATXF50~71A2V1B
Daikin room air conditioner
4P513685-6C – 2019.12
4 Before operation
4.1 Overview: Before operation
This chapter describes what you have to do before operating the unit.
Typical workflow
Before operation usually consist of the following stages:
▪ Inserting the batteries in the user interface.
▪ Fixing the user interface to the wall.
▪ Turning on the power supply.
4.2 To fix the user interface to the wall
2×
b ca
a User interface
b Screws (field supply)
c User interface holder
1 Choose a place where the signals reach the unit.
2 Attach the holder with screws to the wall or a similar location.
3 Hang the user interface on the user interface holder.
4.3 To insert the batteries
The batteries will last for about 1 year.
1 Remove the back cover.
2 Insert both batteries at once.
3 Put the cover back.
2
3
1
AAA.LR03