Daikin Siesta ATXF50A2V1B - Using Powerful Operation; Econo Operation Feature

5 | Operation
User reference guide
20
ATXF50~71A2V1B
Daikin room air conditioner
4P513685-6C – 2019.12
INFORMATION
Powerful operation CANNOT be used together with Econo and Comfort airflow
operation. The last selected function takes priority.
Powerful operation will NOT increase the capacity of the unit if it already operates at
maximum capacity.
5.7.1 To start/stop Powerful operation
1 Press to start.
Result: is displayed on the LCD. Powerful operation runs for 20minutes;
after that, operation returns to the previously set mode.
Mode Airflow rate
Cooling/Heating/Automatic ▪ To maximize the cooling/heating
effect, the capacity of outdoor unit is
increased.
▪ The airflow rate is fixed to the
maximum setting.
▪ The temperature and airflow settings
CANNOT be changed.
Drying ▪ The temperature setting is lowered by
2.5°C.
▪ The airflow rate is slightly increased.
Fan only The airflow rate is fixed to the
maximum setting.
2 Press to stop.
Result: disappears from the LCD.
Note: Powerful operation can be set only when the unit is running. If you press
, operation will be cancelled; disappears from the LCD.
5.8 Econo operation
This is a function which enables efficient operation by limiting the maximum power
consumption value. This function is useful for cases in which attention should be
paid to ensure a circuit breaker will not trip when the product runs alongside other
appliances.
INFORMATION
▪ Powerful and Econo operation CANNOT be used at the same time. The last
selected function takes priority.
▪ Econo operation reduces power consumption of the outdoor unit by limiting the
rotation speed of the compressor. If power consumption is already low, Econo
operation will NOT further reduce power consumption.