5 | Operation
User reference guide
17
ATXF50~71A2V1B
Daikin room air conditioner
4P513685-6C – 2019.12
5.3.1 To start/stop operation mode and to set the temperature
: Unit is operating.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Heating
: Operation mode = Cooling
: Operation mode = Fan only
: Shows the set temperature.
1 Press one or more times to select the operation mode.
Result: The mode will be set in the following sequence:
2 Press to start operation.
Result: is displayed on the LCD.
Result: The operation lamp lights up.
3 Press or on the button one or more times to lower or raise the
temperature.
Note: When using drying or fan only mode, you cannot adjust the temperature.
4 Press to stop operation.
Result: disappears from the LCD.
Result: The operation lamp goes off.
5.4 Airflow rate
1 Press to choose:
5 airflow rate levels, from " " to " "
Automatic operation
Indoor unit quiet operation. When the airflow is set to " ", the
noise from the unit will be reduced.
INFORMATION
▪ If the unit reach the temperature setpoint in cooling, heating or automatic mode.
Fan will stop operating.
▪ When using drying operation mode, you CANNOT adjust the airflow rate setting.
To Next Page
Loading...
