Daikin Siesta ATXF50A2V1B - Using Econo Operation; Timer Settings; Setting ON Timer; Setting OFF Timer

5 | Operation
User reference guide
21
ATXF50~71A2V1B
Daikin room air conditioner
4P513685-6C – 2019.12
5.8.1 To start/stop Econo operation
1 Press to start.
Result: is displayed on the LCD.
2 Press to stop.
Result: disappears from the LCD.
a
A
B
b
c
d
A Running current and power consumption
B Time
a Maximum during normal operation
b Maximum during Econo operation
c Normal operation
d Econo operation
▪ The diagram is for illustrative purposes only.
▪ The maximum running current and power consumption of the air conditioner in
Econo operation varies with the connected outdoor unit.
5.9 OFF/ON timer operation
Timer functions are useful for automatically switching the air conditioner on/off at
night or in the morning. You can also use OFF timer and ON timer in combination.
INFORMATION
Program the timer again in case of:
▪ A breaker has turned the unit off.
▪ A power failure.
▪ After replacing batteries in the user interface.
5.9.1 To start/stop ON timer operation
1 Press to start.
Result: is displayed on the LCD and the timer lamp lights up.
INFORMATION
Each time is pressed, the time setting advances by 1 hour. The timer can be set
between 1 to 12 hours.
2 Press to stop.
Result: disappears from the LCD and the timer lamp goes off.
5.9.2 To start/stop OFF timer operation
1 Press to start.
Result: is displayed on the LCD and the timer lamp lights up.