Daikin Siesta ATXM20N2V1B - Indoor Unit Display

3 | About the system
User reference guide
10
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
a
e
d
l
m
g
k
h
f
b
c
i
j
a Air inlet
b Air outlet
c Front panel
d Service cover
e Place for wireless adapter
f Indoor unit display
g Intelligent eye sensor
h Room temperature sensor
i Only for class 20~35: Titanium apatite deodorizing filter (without frame)
j Only for class 50: Titanium apatite deodorizing filter (with frame)
k Air filter
l Flaps (horizontal blades)
m Louvres (vertical blades)
3.1.1 Indoor unit display
a
b
c
d
e
a Signal receiver for user interface
b Operation lamp
c Timer lamp
d Intelligent eye lamp
e ON/OFF button
ON/OFF button
If the user interface is missing, you can use the ON/OFF button on the indoor unit
to start/stop operation. When operation is started using this button, the following
settings are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic