Daikin Siesta ATXM20N2V1B - To Copy Reservations

5 | Operation
User reference guide
29
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
7 Press .
Result: The time is set and and the temperature blink.
Note: Press to return to the previous screen. If OFF timer is selected,
continue to step 9.
8 Press or to select the desired temperature.
Note: The set temperature for the weekly timer is displayed only when setting the
weekly timer mode.
INFORMATION
The temperature can be set between 10~32°C on the user interface, however:
▪ in cooling and automatic operation mode, the unit will operate at minimum 18°C
even if is set at 10~17°C;
▪ in heating and automatic operation mode, the unit will operate at maximum 30°C
even if is set at 31~32°C.
9 Press .
Result: The temperature and time are set for the ON timer. The time is set for
the OFF timer. The timer lamp lights orange.
Result: A new reservation screen will appear.
10 Repeat the previous procedure to set another reservation or press to
complete the setting.
Result: is displayed on the LCD.
Note: A reservation can be copied with the same settings to another day. Refer to
"5.11.2To copy reservations"[429].
5.11.2 To copy reservations
A reservation can be copied to another day. The complete reservation of the
selected day of the week will be copied.
1 Press .
2 Press or to select the day of the week to be copied.
3 Press .
Result: The reservation of the selected day of the week will be copied.
4 Press or to select the destination day.
5 Press .
Result: The whole reservation is copied to the selected day and the timer lamp
lights orange.