5 | Operation
User reference guide
22
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
5.6 Comfort airflow and Intelligent eye operation
You can use Comfort and Intelligent eye operation separately, or combine them.
5.6.1 Comfort airflow operation
This operation can be used in heating or cooling operation mode. It will provide a
comfortable wind that will NOT come in direct contact with people. The system
automatically sets the fixed airflow position upward in Cooling and downward in
Heating operation mode.
Cooling operation mode Heating operation mode
INFORMATION
Powerful and Comfort airflow operation CANNOT be used at the same time. The last
selected function takes priority. If the vertical automatic swing is selected, Comfort
airflow operation will be cancelled.
5.6.2 Intelligent eye operation
The system detects movement in the room and automatically adjusts the airflow
direction and temperature in order to avoid direct contact with people. If no
movement is detected for 20 minutes, the system switches to energy saving
operation:
Operation Energy saving operation
Heating Temperature is lowered by 2°C.
Cooling and drying If the temperature in the room is:
▪ <30°C, the temperature is raised by 2°C
▪ ≥30°C, the temperature is raised by 1°C
Fan only Decreases airflow rate.
About the Intelligent eye sensor
NOTICE
▪ Do NOT hit or push the Intelligent eye sensor. Doing so may lead to malfunction.
▪ Do NOT place large objects near the Intelligent eye sensor.
INFORMATION
Powerful or Night set operation CANNOT be used at the same time with Intelligent
eye operation. The last selected function takes priority.
▪ Detection range. Up to 7m.
To Next Page
Loading...
