Daikin Siesta ATXM20N2V1B - To Combine off Timer and on Timer; Weekly Timer Operation

5 | Operation
User reference guide
27
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
3 Press again.
Result: and the set time are displayed on the LCD. The timer lamp lights up.
INFORMATION
Each time or is pressed, the time setting advances by 10minutes. Holding
the button down will change the setting rapidly.
4 To stop operation, press .
Result: and disappear from the LCD and the timer lamp goes off.
and the day of the week are displayed on the LCD.
5.10.3 To combine OFF timer and ON timer
1 To set the timers, refer to "5.10.1 To start/stop OFF timer operation" [4 26]
and "5.10.2To start/stop ON timer operation"[426].
Result: and are displayed on the LCD.
Example:
Display Current time Set while… Operation
6:00 the unit is
operating.
Stops at 7:00 and
starts at 14:00.
the unit is NOT
operating.
Starts at 14:00.
Note: If the timer setting is active, the current time is NOT displayed on the LCD.
5.11 Weekly timer operation
With this operation, you can save up to 4 timer settings for each day of the week.
Example: Create a different setting from Monday to Friday and a different setting
for weekends.
Day of the week Setting example
Monday
▪ Make up to 4settings.
6:00 8:30 17:30
25°C 27°C
22:00
1 2 3 4
ON OFF ON OFF
Tuesday~Friday
▪ Use the copy mode if the
settings are the same as for
Monday.
6:00 8:30 17:30
25°C 27°C
22:00
1 2 3 4
ON OFF ON OFF
Saturday
▪ No timer setting
—
Sunday
▪ Make up to 4settings.
8:00 10:00 19:00 21:00
27°C 27°C25°C
ON OFF OFF ON
1 2 3 4
▪ ON-ON-ON-ON setting. Enables scheduling the operation mode and set
temperature.
▪ OFF-OFF-OFF-OFF setting.Only the turn off time can be set for each day.