Daikin Super Multi NX B series

Si12-308 Outdoor Unit (80 / 90 Class)
Removal Procedure 227
12
Take off the thermistor
presser spring, and
remove the thermistor.

Place the thermistor so that
its end comes up to the end
of the presser spring.

Be careful not to lose the
presser spring for the
discharge pipe thermistor.
3. Removing the electrical
box
1
Remove 2 screws of
the electrical box.
2
Turn the electrical box
up side down halfway,
and disconnect the
thermistor lead wire
from the hook.
Step
Procedure Points