What to do if Daikin Super Multi NX C heating stops suddenly with flowing sound?
If the heating operation on your Daikin Air Conditioner stops suddenly and you hear a flowing sound, the system is likely removing frost from the outdoor unit. Please wait for approximately 4 to 12 minutes for the process to complete.
How to fix a Daikin Super Multi NX C that won't start immediately?
If your Daikin Air Conditioner doesn't start immediately, it might be because the ON/OFF button was pressed shortly after the operation was stopped, or the mode was reselected. In both cases, you should wait for about 3 minutes before the operation starts.
Why does my Daikin Super Multi NX C smell?
The Daikin Air Conditioner might emit odors because smells from the room, furniture, or cigarettes have been absorbed into the unit and are being discharged with the airflow. It is recommended to have the indoor unit professionally cleaned. Consult the service shop where you bought the air conditioner.
Why is my Daikin Air Conditioner outdoor unit emitting water or steam?
The outdoor unit of your Daikin Air Conditioner may emit water or steam for two reasons: * In HEAT mode, this happens when frost on the outdoor unit melts during defrost operation. * In COOL or DRY mode, moisture in the air condenses on the cool surface of the outdoor unit piping and drips.
Why doesn't hot air flow out immediately from my Daikin Air Conditioner when heating starts?
You should wait for 1 to 4 minutes after starting the heating operation. The Daikin system is designed to start discharging air only after it has reached a certain temperature.
Why does my Daikin Air Conditioner emit mists from the indoor unit?
The Daikin Air Conditioner may emit mists from the indoor unit when the air in the room is cooled into mist by the cold airflow during cooling operation.
Details specifications for Daikin indoor units for cooling-only models.
Details specifications for Daikin outdoor units for cooling-only models.
Details specifications for Daikin indoor units for heat pump models.
Details specifications for Daikin outdoor units for heat pump models.
Wiring diagram for wall-mounted indoor units (20/25/35 class).
Wiring diagram for wall-mounted indoor units (50/60/71 class).
Wiring diagram for duct-connected indoor units.
Wiring diagram for floor/ceiling suspended dual type units.
Wiring diagram for floor standing indoor units.
Wiring diagram for outdoor units.
Crucial safety guidelines for installation and operation to prevent injury and damage.
Explains how to interpret the operation lamp's status for error detection.
Provides a list of error codes displayed on the remote controller and their meanings.
Details specific error codes and the associated faults for Daikin units.
Comprehensive guide for diagnosing and resolving various system faults.
Troubleshooting steps for issues related to the indoor unit's printed circuit board.
Diagnosing issues related to freeze-up or high-pressure protection activation.
Steps to diagnose and resolve communication errors between indoor and outdoor units.
Troubleshooting guide for freeze-up protection activation during cooling.
Diagnosing and resolving compressor overload issues.
Troubleshooting steps for detecting and resolving over-current situations.
General| Series | Super Multi NX C-Series |
|---|---|
| Indoor Units | Wall-mounted, Floor-standing, Cassette |
| Refrigerant | R32 |
| Control | Remote Control, Wi-Fi Control (Optional) |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level | 19dB(A) - 45dB(A) |
| Outdoor Unit Noise Level | 45dB(A) - 60dB(A) |
| Indoor Unit Weight | 8kg - 25kg |
| Outdoor Unit Weight | 35kg - 70kg |
To Next Page