Daikin Super Multi NX C-Series User Manual

SiE12-411 Instruction
System Configuration 147
2.13 Care and Cleaning
FTK(X)E 25/35 B
CAUTION Before cleaning, be sure to stop the operation and turn the breaker OFF.
" Indoor unit, Outdoor unit and Remote control
1. Wipe them with dry soft cloth.
" Front grille
1. Open the front grille.
• Hold the grille by the tabs on the two sides and
lift it until it stops with a click.
2. Remove the front grille.
• Supporting the front grille with one hand,
release the lock by sliding down the knob with
the other hand.
• To remove the front grille, pull it toward
yourself with both hands.
3. Clean the front grille
• Wipe it with a soft cloth soaked in water.
• Only neutral detergent may be used.
• In case of washing the grille with water, dry it
with cloth, dry it up in the shade after washing.
4. Attach the front grille
• Set the 3 keys of the front grille into the slots
and push them in all the way.
• Close the front grille slowly and push the grille
at the 3 points.
(1 on each sides and 1 in the middle.)
• Check to see if the rotating axis in the upper
center section is moving.
CAUTION
Units
• Don’t touch the metal parts of the indoor unit. If you touch those parts, this may cause an injury.
• When removing or attaching the front grille, use a robust and stable stool and watch your steps
carefully.
• When removing or attaching the front grille, support the grille securely with hand to prevent it from
falling.
• For cleaning, do not use hot water above 40 °C, benzine, gasoline, thinner, nor other volatile oils,
polishing compound, scrubbing brushes, nor other hand stuff.
• After cleaning, make sure that the front grille is securely fixed.
Fit the key
into the slot.
Slide up the knob.

Daikin Super Multi NX C-Series Specifications

General

Brand	Daikin
Model	Super Multi NX C-Series
Category	Air Conditioner
Language	English