SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series SiBE18-821_C
322 Operation Manual
English 14
II. IN CASE BESIDES EMERGENCY STOP
1. The unit does not operate at all.
2.
WARNING
Number
Number
[Trouble]
[Remedial action]
Malfunction Code
•
Check if the receiver is exposed of
sunlight or strong light. Keep
receiver away from light.
•
Check if there are batteries in the
remote controller. Place the batteries.
•
Check if the indoor unit number and
wireless remote controller number
are equal.
Operate the indoor unit with the remote
controller of the same number.
Signal transmitted from a remote controller of
a different number cannot be accepted. (If
the number is not mentioned, it is considered
as 1 )
The system operates but it does not
sufficiently cool or heat.
Contact the place of purchase in the
following case.
When you detect a burning odor, shut
OFF power immediately and contact the
place of purchase. Using the equipment
in anything but proper working condition
can result in equipment damage, electric
shock and/or fire.
The RUN lamp of the indoor unit is flashing
and the unit does not work at all.
Unit No. which
sensed trouble
INSPECTION
display
Check the malfunction code (A1 - UF) on the
remote controller.
Notify and inform the model name and what
the malfunction code indicates to your Daikin
dealer.
•
I
f the set temperature is not proper.
•
If the FAN SPEED is set to LOW
SPEED.
•
If the air flow angle is not proper.
3P107422-1S
To Next Page
Loading...
Need help?
General
