6-2 Viewing customer/network map information
Customer information and network map (system/line information) can be checked by recorded data. By
this data, it is possible to check customer/customer’s VRV system, model information stored in PC.
[Procedure]
(1) In main menu, press [Customer data] button to proceed to [Customer selection] screen.
(2) Customer selection screen
Press [Select customer] button to proceed to [Network map selection] screen
(3) Network map selection screen
Select desired map and press [OK] button to proceed to [Network map display] screen
Press [Select customer] button
2. Press [OK]
1. Select desired map
Press [Customer data] button
AS0112-P-DENV
39
To Next Page
Loading...