Daikin UAL-A Series - Installing Chiller

23
Installing Chiller
■ The user manual, warranty card, accessories, and packing list are place in the electrical box of the unit.
■ Reserve sufcient maintenance space if possible.
■ If the unit is installed in a place where it snows in winter, proper measures must be taken to protect the unit
against snow and ensure that the unit works properly.
■ The groundwork should be made of concrete or supporting structures. While designing the groundwork, you
must fully consider the strength of the oor, water discharge (the unit discharges water while working), pipeline
and wiring. If the oor is not strong enough, the unit might fall off and breakdown, even
incur bodily injuries.
■ Screw down the chilled water unit using anchor bolts so that it will not fall off in case of
strong wind or earthquakes. To avoid damages caused by strong wind or earthquakes,
The unit must be securely installed at a proper place to avoid direct hit of strong winds.
■ Depending on mounting conditions, operation vibration might pass through the
groundwork and generate noises in the floor and walls. Therefore, proper vibration
dampening mechanisms (such as bumper cushion, bumper frame etc.) should be in
place.
■ Corners and edges should be properly installed. Otherwise, the unit might get unbalanced and cause the
grounding pins to bend. The unit might fall off and cause bodily injuries if it is not properly installed.
Hoisting Chillers
Please hoist the unit according to the following illustrations. Tie the cables to the four corners of the unit while
moving it. If you tie the cables to only three corners of the unit, the unit might get unbalanced and fall off.
NOTES:
■ CHILLED WATER UNITS MUST BE MOVED WITH GREAT CARE.
■ ACCESSORY STRIPS CANNOT BE USED TO HOIST OR MOVE THE UNIT AS THEY MIGHT BREAK AND CAUSE UNEXPECTED
ACCIDENTS.
■ DO NOT TOUCH THE HEAT SINKS OF THE HEAT EXCHANGER BARE-HANDEDLY AS THEY MIGHT CUT YOUR FINGERS.
■ DISPOSE ALL PLASTIC BAGS PROPERLY AND KEEP THEM AWAY FROM CHILDREN.