13 | About the box
Installer and user reference guide
48
RKXYQ5T8+8T7Y1B + RDXYQ5T8+8T7V1B
VRV IV heat pump for indoor installation
4P499898-1B – 2021.12
13 About the box
In this chapter
13.1 Overview: About the box........................................................................................................................................................ 48
13.2 Compressor unit ..................................................................................................................................................................... 48
13.2.1 To unpack the compressor unit ............................................................................................................................. 48
13.2.2 To handle the compressor unit.............................................................................................................................. 49
13.2.3 To remove the accessories from the compressor unit ......................................................................................... 49
13.2.4 To remove the transportation stay........................................................................................................................ 50
13.2.5 To remove the transportation EPS ........................................................................................................................ 50
13.3 Heat exchanger unit ............................................................................................................................................................... 51
13.3.1 To unpack the heat exchanger unit ....................................................................................................................... 51
13.3.2 To handle the heat exchanger unit........................................................................................................................ 51
13.3.3 To remove the accessories from the heat exchanger unit ................................................................................... 52
13.3.4 To remove the transportation sheet ..................................................................................................................... 52
13.1 Overview: About the box
This chapter describes what you have to do after the boxes with the compressor
unit and the heat exchanger unit are delivered on-site.
▪ Removing the transportation stay (only for RKXYQ5)
▪ Removing the transportation EPS (only for RKXYQ8)
▪ Removing the transportation sheet from the heat exchanger unit
Keep the following in mind:
▪ At delivery, the unit MUST be checked for damage. Any damage MUST be
reported immediately to the claims agent of the carrier.
▪ Bring the packed unit as close as possible to its final installation position to
prevent damage during transport.
▪ Prepare the path along which you want to bring the unit inside in advance.
▪ When handling the unit, take into account the following:
Fragile, handle the unit with care.
Keep the unit upright in order to avoid compressor damage.
13.2 Compressor unit
13.2.1 To unpack the compressor unit
To Next Page
Loading...
