EN
Page | 41
11.3 Unpacking the appliances
Transport instructions
Inspect the appliance for transport damage.
Removing transport protection
The oven and glass ceramic hob are protected for transport.
• Remove all adhesive tapes, polystyrene inserts and plastic
film.
• Carefully remove residues of adhesive with white spirit.
6
After Sales Service Tel. +49 2944 9716-760
DANGER OF CUTS DUE TO DAMAGED
SHARP EDGES!
→ Have a damaged hob or oven door repaired or
replaced immediately by After Sales Service.
The packaging materials must be undamaged.
→ On no account should a damaged appliance be installed
or put into operation.
→ In case of damage, contact After Sales Service
6
or the
RISK OF INJURY DUE TO IMPROPER
REPAIRS!
→ Have defective appliances repaired only by an
authorised and qualified electrician.
Packaging materials
Dispose of in an
environmentally safe
manner
To Next Page
Loading...
