55
Hot water supply
This machine has 2 automatic
preset time-dosed hot water
buttons for tea.
Place a container (that can bear
a temperature of at least 125°C)
under the hot water spigot (6
Pic.
2) and push one of the two P8-
P10 hot water buttons (Pic. 3).
The quantity and temperature
of hot water for infusions can be
set during machine installation;
this setting must be carried out
exclusively by the installer.
WARNING
Avoid pushing hot water but-
tons before placing the pipe
into a container to avoid getting
burned.
To Next Page
Loading...
