Dalsa Spyder 3 GigE SG-10-01k80-00-R - A3.2 Rebooting the Camera; A4 Diagnostics; A4.1 Generating a Test Pattern

Spyder 3 GigE User’s Manual
DALSA 03-032-10158-09
85
A3.2 Rebooting the Camera
The command rc reboots the camera. The camera starts up with the last saved settings
and the baud rate used before reboot. Previously saved pixel coefficients are also
restored.
A4 Diagnostics
A4.1 Generating a Test Pattern
Purpose: Generates a test pattern to aid in system debugging. The test
patterns are useful for verifying camera timing and connections.
The following tables show each available test pattern.
Syntax:
svm i
Syntax Elements:
i
0
Video.
1
12 bit ramp test pattern.
2 tap model
1 tap model
2
8 bit step test pattern.
2 tap model