Need help?Do you have a question about the Dalsa Spyder3 S3-14-01k40-00-R and is the answer not in the manual?
General| Line Rate | 40 kHz |
|---|---|
| Output Interface | Camera Link |
| Dynamic Range | 60 dB |
| Sensor Type | CMOS |
| Operating Temperature | 0°C to 40°C |
General safety and handling guidelines for camera operation and maintenance.
Guidance on handling and cleaning the sensor window to prevent damage.
Detailed procedure and equipment for cleaning the sensor window.
Key features and performance advantages of the Spyder3 CL cameras.
Detailed performance specifications for Spyder3 CL cameras.
Overview of available Spyder3 CL camera models.
Graphs showing how camera performance changes with operating conditions.
Physical dimensions and mounting details for Spyder3 cameras.
Steps to set up and run the camera system.
Details on data connectors, signals, and configurations for Camera Link.
Configuring factory settings, output format, and modes for camera operation.
Setting tap readout direction (left-to-right or right-to-left).
Operating in High, Low, or Tall Pixel sensitivity modes.
Selecting and configuring camera exposure modes, line rates, and exposure times.
Overview of analog and digital processing steps for image enhancement.
How FFC removes non-uniformity using pixel-by-pixel correction.
Performing PRNU calibration to ensure uniform response to light.
Using test patterns for debugging and verifying camera timing.
Table of warning and error messages with descriptions and causes.
Controls dark current accumulation to minimize image artifacts.
Information on Camera Link interface, signals, and configurations.
Statement of compliance with electromagnetic compatibility standards.
To Next Page
