2 Spyder3 S3-14 and S3-24 Monochrome Camera User's Manual
03-032-20117-01 Teledyne DALSA
© 2013 Teledyne DALSA. All information provided in this manual is believed to be accurate and reliable. No responsibility is
assumed by Teledyne DALSA for its use. Teledyne DALSA reserves the right to make changes to this information without notice.
Reproduction of this manual in whole or in part, by any means, is prohibited without prior permission having been obtained from
Teledyne DALSA.
About Teledyne Technologies and Teledyne DALSA, Inc.
Teledyne Technologies is a leading provider of sophisticated electronic subsystems, instrumentation and communication products,
engineered system s, aerospace engines, and energy and pow er generation system s. Teled yne Technologies’ operations are primarily
located in the United States, the United Kingdom and Mexico. For more inform ation, visit Teled yne Technologies’ website at
www.teledyne.com.
Teledyne DALSA, a Teledyne Technologies company, is an international leader in high performance digital imaging and
semiconductors with approximately 1,000 employees worldwide, headquartered in Waterloo, Ontario, Canada. Established in 1980,
the company designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing MEMS
prod u cts and services. For more information, visit Teledyne DALSA’s w ebsite at www.teledynedalsa.com.
Support
For further information not includ ed in this manual, or for inform ation on Teled yne DALSA’s extensive line of image sensing
products, please contact:
North America
605 McMurray Rd
Waterloo, ON N2V 2E9
Canada
Tel: 519 886 6000
Fax: 519 886 8023
www.teledynedalsa.com
sales.americas@teledynedalsa.com
support@teledynedalsa.com
Europe
Teledyne DALSA GmbH
Felix-Wankel-Strasse 1
D-82152 Krailling (Munich)
Germany
Tel: +49 - 89 - 89545730
Fax: +49 - 89 – 895457346
www.teledynedalsa.com
sales.europe@teledynedalsa.com
support@teledynedalsa.com
Asia Pacific
Ikebukuro East 13F
3-4-3 Higashi-Ikebukuro
Toshima-ku, Tokyo 170-0013
Japan
Tel: 81 3 5960 6353
Fax: 81 3 5960 6354 (fax)
www.teledynedalsa.com
sales.asia@teledynedalsa.com
support@teledynedalsa.com
Industry Standards
Teledyne DALSA and this model of the Spyder3 camera support the Camera Link™ communications interface for vision
applications. Camera Link is a high speed communications interface for vision applications. It provides a standard method of
communication between digital cameras and frame grabbers.
Detailed information on Camera Link is available in the Teledyne DALSA Camera Link Implementation Road Map documentation,
available from the Knowledge Center on our Web site: (http:/ / www.teledynedalsa.com/ mv/ knowledge/ appnotes.aspx).
To Next Page
Loading...
Need help?
General
