28 Spyder3 S3-14 and S3-24 Monochrome Camera User's Manual
03-032-20117-01 Teledyne DALSA
Camera Help Screen
For quick help, the camera can return all available commands and parameters through the serial
interface.
There are two different help screens available. One lists all of the available commands to configure
camera operation. The other help screen lists all of the commands available for retrieving camera
parameters (these are called ―get‖ com m ands).
To view the help screen listing all of the camera configuration commands, use the command h.
To view a help screen listing all of the ―get‖ com m and s, use the comm and gh.
The camera configuration command help screen lists all commands available. Parameter ranges
displayed are the extreme ranges available. Depending on the current camera operating conditions, you
may not be able to obtain these values. If this occurs, values are clipped and the camera returns a warning
message.
Some commands may not be available in your current operating mode. The help screen displays NA in
this case.
To Next Page
Loading...
