What to do if Dalsa Security Camera shows no output or erratic behavior?
If your Dalsa Security Camera is showing no output or behaving erratically, it might be picking up random noise because of long cables acting as antennas. Verify that the camera is not receiving spurious inputs, for example, EXSYNC if the camera is in exposure mode that requires external signals.
What to do if Dalsa Security Camera has line dropout, bright lines, or incorrect line rate?
If your Dalsa Security Camera is experiencing line dropout, bright lines, or an incorrect line rate, verify that the frequency of the internal sync is set correctly. If the camera is set to external sync, ensure that the EXSYNC signal supplied to the camera does not exceed the camera’s usable line rate under the current operating conditions.
General| Dynamic Range | 60 dB |
|---|---|
| Interface | Camera Link |
| Line Rate | Up to 80 kHz |
| Operating Temperature | 0°C to +50°C |
| Power Supply | 12 VDC |
To Next Page
