Spyder3 GigE Vision User’s Manual
DALSA 03-032-20027-02
13
1.5 Supported Industry Standards
Spyder GEV cameras are 100% compliant with the GigE Vision 1.0 specification. This
specification defines the communication interface protocol used by GigE Vision devices.
For more information on these requirements refer to the following site:
http://www.machinevisiononline.org/public/articles/details.cfm?id=2761
Spyder GEV cameras implement a superset of the GenICam
TM
specification which defines
device capabilities. This description takes the form of an XML device description file
respecting the syntax defined by the GenApi module of the GenICam
TM
specification. For
more information on these requirements refer to the following site: www.genicam.org
.
To Next Page
Loading...
Need help?
General
