Spyder3 S3-14 and S3-24 Monochrome Camera User's Manual 7
Teledyne DALSA 03-032-20117-01
The Spyder3 S3-14 and S3-24
Cameras
Camera Highlights
The Spyder3 CL surpasses its predecessor, the Spyder2, with 3x more responsivity and 2x the speed. At
its core is dual line scan technology that achieves unprecedented responsivity and throughput rates of 80
megapixels per second, without impacting noise.
The Spyder3 CL features the Camera Link™ serial interface and is fully programmable, offering precise
control over key performance variables such as gain and offset and improved ease of use and setup.
The temperature range performance of the SC-14 and SC-24 models has increased from an operating
temperature of 0 °C to 50 °C to an operating temperature of 0 °C to 65 °C.
Features and Programmability
Broadband responsivity up to 408 ±16 DN(nJ/ cm2) @10 dB gain, 8 bit
1024, 2048, or 4096 pixels, 14 µm x 14 µm (1k and 2k) and 10 µm x 10 µm (4k) pixel pitch, 100% fill
factor
Up to 68 kHz line rates
Dynamic range up to 1400:1
Data transmission exceeding 10 meters
±50 µm x, y sensor alignment
Base Camera Link configuration (8 or 12 bit data on 1 or 2 taps depending on camera model)
Serial interface (ASCII, 9600 baud, adjustable to 19200, 57600, 115200), through Camera Link.
Mirroring and forward/ reverse control.
Programmable gain, offset, exposure time and line rate, trigger mode, test pattern output, and
camera diagnostics.
Tall pixel, high sensitivity, or low sensitivity mode available.
Flat-field correction—minimizes lens vignetting, non-uniform lighting, and sensor FPN and PRNU.
Applications
FPD inspection
Pick and place
Container inspection
Wood / tile / steel inspection
100% print inspection (lottery tickets, stamps, bank notes, paychecks)
Postal sorting
Glass bottle inspection
Industrial metrology
Food inspection
Web inspection
Models
To Next Page
Loading...
Need help?
General
