100
ActiveX Updating:
The ActiveX control should be also updated when you update the DVR/NVR
firmware. Use the tool in the attached CD to uninstall the old ActiveX control so
that the newest version can be registered.
Automatic Uninstall
Please follow the steps:
1. After updating the DVR/NVR firmware, close the web browser.
2. Run the "unreg" file in the CD to automatically remove the existing
ActiveX component "WATCH_16R" from your PC.
3. Log in the DVR/NVR via web browser again, and the browser will require
you to install the new version of ActiveX control.
Manual Uninstall
If the tool does not work, please follow the following steps to uninstall the
ActiveX control manually.
1. Look for the files "KConfig.ocx" and "WATCH_16R.ocx" in one of the
possible paths:
"C:\WINDOWS\Downloaded Program Files"
"C:\WINDOWS\W16R"
"C:\WINDOWS\system32\WATCH_16R"
To Next Page
Loading...