111
I. HTTP Notification
Use the checkbox to enable or disable HTTP Notification. This function allows
users to set up the CGI command to a HTTP server. The server can be any
device that can receive CGI via HTTP protocol. When an alarm events occurs
the NVR sends CGI to that server.
HTTP Server: Key-in the server IP address.
HTTP Port: Key-in the server port used for http protocol.
User Name: Key-in the server username.
Password: Key-in the server password.
HTTP CGI: Key-in the CGI that you would like to send to the server when an
alarm events occurs.
To Next Page
Loading...