Danbit H.264 DVR - Page 30

30
Note: When you select RTSP mode, make sure the substream resolution
of camera is VGA(640x480), otherwise you will receive the warning
message when you try to connect to the camera:
Examples of some RTSP settings:
RTSP Path 1
(IP Cam Main
stream)
RTSP Path 2
(IP Cam Sub
stream)
Result
1920 x 1080
640 x 480
OK.
NVR takes 1920x1080 streaming for
single channel view mode, and 640x480
streaming for split screen mode.
1920 x 1080
N/A
(Fill in nothing on
"RTSP Path 2")
Error Message: ”Invalid Substream
Resolution! Please modify IP Cam.”
NVR takes 1920x1080 streaming for