d&b audiotechnik Q Series - The d&b System reality

Contents
1. Safety precautions..........................................................4
1.1. Intended use.....................................................................................4
1.2. General safety instructions...............................................................4
1.3. Load capacity/System safety..........................................................4
1.3.1. ArrayCalc / TI 385...............................................................4
2. Q-Series array with the Z5159 Q Flying frame................5
2.1. Rigging components.........................................................................6
2.1.1. Z5159 Q Flying frame..........................................................6
2.1.2. Z5155 Q Hoist connector chain..........................................6
2.1.3. Z5154 Q Rigging set............................................................6
2.2. Preparation for the set up................................................................7
2.3. Assembly of the array......................................................................7
2.4. Alternative set up..............................................................................9
2.5. Final check of the array.................................................................10
2.6. Hoisting the array..........................................................................10
2.7. Derigging.......................................................................................10
2.8. Ground stacks supported by the Q Flying frame.........................10
3. Z5156 Q Flying adapter................................................11
3.1. Load capacity/System safety........................................................11
3.2. Suspension of the Q Flying adapter.............................................11
3.3. Assembly........................................................................................11
4. Secondary safety..........................................................12
4.1. Secondary safety at Z5159 Q Flying frame..................
..............12
4.2. Secondary safety at Z5156 Q Flying adapter............................13
5. Aiming and securing of the array..................................14
5.1. Horizontal aiming and securing of the array...............................14
5.2. Modifying the vertical aiming of the array...................................14
6. Wind loads...................................................................15
7. Care and maintenance / Disposal.................................16
7.1. Transport / Storing........................................................................16
7.2. Visual and functional inspection...................................................16
7.3. Disposal..........................................................................................16
EC Declaration of Conformity............................................17
Q-Series Rigging manual (1.2EN) - Contents - 1