d&b audiotechnik Q Series User Manual

d&b Q-Series 15
The Qi1 rigging examples
With a 15° vertical HF dispersion per cabinet, the Qi1 can be
used to construct vertical columns that produce a curved coherent
wave front. The mechanical and acoustical design of the cabinet
enables vertical splay angles to be set between 0° and 14°. Qi1
cabinets can therefore be used in vertical configurations starting
from two cabinets with a 15° to 30° dispersion, up to nine
cabinets with a fully user and venue defined vertical profile. Qi
subwoofers can be integrated at any position within the array.
Three subwoofers can be mounted together in CSA mode, where
the centre QiCSA-SUB radiates to the back. For further information
please refer to the TI 385 d&b Line array design, which is
available for download at www.dbaudio.com.
Qi-SUB/QiCSA-SUB
Cardioid Subwoofer Array
front view
Qi-SUB/QiCSA-SUB
Cardioid Subwoofer Array
back view
Flown Qi1/Qi-SUB array with
Z5145 Ci/Qi Mounting frame
Z5160 Q Load adapter
Z5147 Rota clamp
Z5170 Qi Mounting adapter
Z5171 Qi Mounting plate
Z5172 Qi-SUB Mounting plate
Qi rigging system
Z5170
Z5172
Z5171

d&b audiotechnik Q Series Specifications

General

Brand	d&b audiotechnik
Model	Q Series
Category	Speakers
Language	English