Danfoss 103E7 - Replacement Model Guide

GB
103E7
10
PROGRAMME
NEXT/ON/OFF
+
-
DA Y
COPY
PROGRAMME
NEXT/ON/OFF
+
-
DA Y
COPY
PROGRAMME
NEXT/ON/OFF
+
-
DA Y
COPY
PROGRAMME
NEXT/ON/OFF
+
-
DA Y
COPY
PROGRAMME
NEXT/ON/OFF
+
-
DA Y
COPY
Return to RUN mode
COPY previous event times
To move to next DAY
To amend TIME
To advance to next time setting
PROGRAMME
NEXT/ON/OFF
+
-
DA Y
COPY
3. Press DAY button once only. TU will
appear at the bottom of the display.
Continue programming the rest of
the week by pressing:
a) NEXT ON/OFF button to move to
the next setting,
b) + and - buttons to amend the
time,
c) DAY to advance to the next day.
Alternatively press COPY to keep
the same settings as the day before.
4. Press the PROGRAMME button to
return the unit to RUN mode.
5. Proceed to page 13.
■