GB
Danfoss Heating
13
3.5 Running your Programme
The 103E7 controls your hot water and heating together, turning them
on and o at the same times.
To run the central heating and hot water programme press the
SELECT button.
As you press SELECT a bar on the display will move between ON,
OFF, ALLDAY and AUTO.
• ON = the hot water/heating will remain on constantly.
• OFF = the hot water/heating will not come on.
• AUTO = the hot water/heating will come on and go o
according to the programmed times.
• ALLDAY = the unit will come on at the rst programmed
ON and will remain on until the last programmed OFF.
Select the option you require, depending on your circumstances,
time of year, etc.
+lHR
~
f•J
Ii
•·~
~
■
To Next Page
Loading...
