Danfoss BOCK F - Declaration of incorporation

D
GB
F
Ru
40 | AQ449946687878en-000201
© Danfoss | Climate Solutions | 2023.07
11| Declaration of incorporation
96457-07.2022-DGbFEITrPtRu
BOCK
®
Declaration of incorporation for incomplete machinery
in accordance with EC Machinery Directive 2006/42/EC, Annex II 1. B
Manufacturer: Bock GmbH
Benzstraße 7
72636 Frickenhausen, Germany
We, as manufacturer, declare in sole responsibility that the incomplete machinery
Name: Semi-hermetic compressor
Types: HG(X)12P/60-4 S (HC) ........................HG(X)88e/3235-4(S) (HC)
UL-HGX12P/60 S 0,7........................... UL-HGX66e/2070 S 60
HGX12P/60 S 0,7 LG .......................... HGX88e/3235 (ML/S) 95 LG
HG(X)22(P)(e)/125-4 A ........................ HG(X)34(P)(e)/380-4 (S) A
HGX34(P)(e)/255-2 (A) ....................... HGX34(P)(e)/380-2 (A)(K)
HA(X)12P/60-4 .................................... HA(X)6/1410-4
HAX22e/125 LT 2 LG ......................... HAX44e/665 LT 14 LG
HGX12e/20-4 (ML/S) CO
2
(LT) ........... HGX44e/565-4 S CO
2
UL-HGX12e/20 (S/ML) 0,7 CO
2
(LT)... UL-HGX44e/565 S 31 CO
2
HGX12/20-4 (ML/S/SH) CO
2
T.............. HGX46/440-4 (ML/S/SH) CO
2
T
UL-HGX12/20 ML(P) 2 CO
2
T............. UL-HGX46/440 ML(P) 53 CO
2
T
HGZ(X)7/1620-4 .................................. HGZ(X)7/2110-4
HGZ(X)66e/1340 LT 22........................ HGZ(X)66e/2070 LT 35
HRX40-2 CO
2
T H................................ HRX60-2 CO
2
T H
Name: Open type compressor
Types: F(X)2 .......................................... F(X)88/3235 (NH3)
FK(X)1......................................... FK(X)3
FK(X)20/120 (K/N/TK)................. FK(X)50/980 (K/N/TK)
Serial number: BC00000A001 – BN99999Z999
complies with the following provisions of the above-mentioned Directive:
According to Annex I, points 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.5.1, 1.5.2, 1.5.13 and
   1.7.1to1.7.4(excepted1.7.4f)arefullled.
Applied harmonised standards, in particular:
EN ISO 12100 :2010
Safety of machinery — General principles for design — Risk
assessment and risk reduction
EN 12693 :2008 Refrigerating systems and heat pumps — Safety and environmental
requirements — Positive displacement refrigerant compressors
Remarks: We also declare that the special technical documentation for this incomplete machine has been
created in accordance with Annex VII, Part B and we obligate to provide these upon reasoned
request from the individual national authorities by data transfer.
   Commissioningis prohibiteduntilit hasbeenconrmed thatthemachinery intowhichthe
incomplete machine above is to be incorporated complies with the EC Machinery Directive and
an EC Declaration of Conformity, Annex II. 1. A exists.
Bock GmbH
Authorized person for compiling and handing Alexander Layh
over technical documentation: Benzstraße 7
72636 Frickenhausen, Germany
Frickenhausen, 04th of January 2021
i. A. Alexander Layh, Global Head of R&D