Danfoss BOCK F - Areas of application F, F-NH3; Refrigerants; Oil charge; Oil charge NH3

D
GB
F
Ru
© Danfoss | Climate Solutions | 2023.07
AQ449946687878en-000201| 9
3 | Areas of application F, F-NH
3
The compressors are lled with the following oil type at the factory:
- for R134a, R404A/R507, R407C BOCK lub E55
- for R22 BOCK lub A46
Compressors with ester oil charge (BOCK lub E55 ) are marked with an X in the type designation
(e.g. FX16/2051).
3.1 Refrigerants
• HFKW: R134a, R404A/R507, R407C
• (H)FCKW: R22
NH
3
: R717
3.2 Oil charge
INFO!
For refilling, we recommend the above oil types.
See also chapter 6.4
The oil level must be in the visible
part of the sight glass; damage
to the compressor is possible if
overfilled or underfilled!
ATTENTION!
Fig. 5
max. oil level
min. oil level
The compressors are lled with the following oil type at the factory:
- for R717: Fuchs Reniso KC 68
3.3 Oil charge NH
3