Danfoss CF-RF - Temperature Settings; Changing Default Display Temperature

6 VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
3. Temperature Settings
Digital Display - g. 1
Set value adjustment
Minimum temperature limitation
Maximum temperature limitation
Lock icon (settings locked from Remote
Controller, CF-RC)
Transmission link icon
Low battery indicator
Alarm icon
Timer icon (time program is active from
Remote Controller, CF-RC)
Room temperature
Floor surface temperature
Changing default display temperature - g. 1.
1. The actual room temperature is shown in the
display as default
2. To change default display from actual room
temperature to actual oor surface tempera-
ture, press and hold the push button
until SET MAX is shown in the display
3. Press the button
shortly and repeatedly
until
or is ashing in the display
4. Press the up/down selector to select the
new default display temperature:
Room temperature
Floor surface temperature