5.7 Reading off temperatures
Reading the hot water temperature.
1 Press either the right or left button once to open the INFORMATION main menu. The cur-
sor is in the OPERATION menu option.
2 Press the down button to move the cursor to the TEMPERATURE menu option.
3 Open your selection by pressing the right button once.
4 Press the down button to move the cursor to HOTWATER. The value shown at the
HOTWATER menu option is the hot water’s current value.
5 Open your selection by pressing the right button once. A graph of the hot water tem-
perature over the last hour is shown.
6 Press the left button three times to exit the menu.
To view the TEMPERATURE history:
1 Press either the right or left button once to open the INFORMATION main menu. The cur-
sor is in the OPERATION menu option.
2 Press the down button to move the cursor to the TEMPERATURE menu option.
3 Open the menu by pressing the right button once.
4 The cursor is at the OUTDOOR value.
5 Press the up or down button to move the cursor to the desired value.
6 Open your selection by pressing the right button once. A graph appears in the display.
7 Move the cursor along the time axis using the up (plus) or down (minus) buttons. An
exact value at the relevant time is shown at the top of the display.
8 Press the left button three times to exit the menu.
To Next Page
Loading...
