Danfoss ECL Comfort 310

ECAMENU>ECAfactory>ECAclearapps.
Eraseallapps.(Eraseallapplications)
EraseallapplicationswhichareintheECA30/31.
Aftererasing,theapplicationcanbeuploadedagain.
NO:
Theeraseprocedureisnotdone.
YES:
Theeraseprocedureisdone(await5sec.).
Aftertheeraseprocedure,apop-upinthedisplayindicates"Copy
application".Choose"Yes" .
HereaftertheapplicationisuploadedfromtheECLcontroller.An
uploadbarisshown.
ECAMENU>ECAfactory>ECAdefault
Restorefactory
TheECA30/31issetbacktofactorysettings.
Affectedsettingsbytherestoreprocedure:
•RoomToffset
•RHoffset(ECA31)
•Backlight
•Contrast
•Useasremote
•Slaveaddr.
•Connectionaddr.
•Overrideaddr.
•Overridecircuit
•Overridemode
•Overridemodeendtime
NO:
Therestoreprocedureisnotdone.
YES:
Therestoreprocedureisdone.
178|©Danfoss|2017.09
VI.GU.L2.02
OperatingGuideECLComfort210/296/310,applicationA275/A375