3 Permanent magnets in the rotor
System introduction
Danfoss provides electric drive trains for applications in heavy mobile work machines, marine vessels and
buses. The drive trains include all essential components for converting from traditional to hybrid electric
(HEV) or electric vehicle (EV) solutions. Danfoss technology saves fuel and lowers emission and noise
levels.
Overview of the Danfoss drive train system
The electric machines are liquid cooled with water/glycol mixture. For more information, see
Chapter Cooling connections.
A low voltage measurement signal connector is attached to the electric machines. Different temperature
and resolver signals can be read, depending on the machine options chosen. For more information about
the connection, see Chapter Low voltage connections.
The electric machines (some models) can be equipped with one or two anti-condensations heater(s),
depending on the machine type and the option chosen. The heater is used to prevent any water
condensing inside the machine enclosure.
Overview of electric machine system
User Guide
EM-PMI375
Product overview
20 |
©
Danfoss | November 2021 BC265856307805en-000202
To Next Page
Loading...