Only trained and qualified personnel familiar with the relevant safety requirements are
allowed to operate the electric machine.
Do not use the electric machine without properly dimensioned and operating cooling system.
Maximum operation temperature, current and rotational speed of the electric machine must
not be exceeded to avoid permanent damage.
The surface of the electric machine might be hot. Do not touch the electric machine during
operation.
Entanglement hazard! Do not touch the electric machine during operation.
Use the anti-condensation heater, if fitted, when the electric machine is not in use. This
prevents condensation and possible damage to the electric machine.
Use sufficient personal protective equipment when you are near the electric machine.
Read the instructions in this user guide before you install the electric machine.
User Guide
EM-PMI375
Operation
©
Danfoss | November 2021 BC265856307805en-000202 | 57
To Next Page
Loading...