Danfoss EM-PMI375 - Rating Plate

4 Connection box containing the power connections.
5 Flange mountings, D-end and N-end.
6 Grease fill connections (+BHS option dependent).
7 Cooling system connections (bores G3/4).
8 Low voltage connector (measurement connector), including low voltage grounding connector.
9 Grease escape connection, D-end and N-end (+BHS option dependent).
10 Lifting points.
11 Additional attachment points.
Rating plate
Each electric machine has a rating plate which can be found on the machine frame. The rating plate
contains machine rating and identification. The rating values in the Figure below are not correct for this
machine. See the rating plate on the machine and data sheets for the correct values.
Rating plate
Rating plate fields
Field Explanation Unit
1 Electric machine product family: EM-PMI or EM-PME
2 Electric machine type code and options
Serial No. Serial number
U Rated voltage
(phase-to-phase AC)
V
rms
I Rated current (AC) I
rms
P Rated power (S9) according to IEC60034-1 kW
n Rated speed rpm
T Rated torque (S9) at rated speed Nm
User Guide
EM-PMI375
Product overview
22 |
©
Danfoss | November 2021 BC265856307805en-000202