EasyManuals Logo

Danfoss EM-PMI375 User Manual

Danfoss EM-PMI375
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
EM-PMI375-T1100 options (continued)
Variant Code Description Additional information
Bearing insulation * Non-insulated bearings Non-insulated bearings
+BIN Insulated bearing in N-end Insulated bearing in N-end
+BIA Insulated bearing in both
ends
Insulated bearing in both ends
Shaft grounding * None
+SG1 D-end shaft grounding In-built grounding ring
Protection class * Standard protection class IP65 protection class
+IP67 IP67 protection class IP67 protection class, only available with
+BGL
Cable direction * Cable direction fixed Cable direction towards D-end
+CNE Cable direction towards N-
end
Cable direction towards N-end
Rotation sensor (resolver) * None No resolver
+RES1 Resolver In-built non contacting resolver, 6-pole
pair
+RES2 Double resolver 2 x In-built non contacting resolver, 6-pole
pair
Winding temperature
sensor
* Temperature surveillance 3 x PT100 in the windings
+TEMP4 Redundant temperature
surveillance
6 x PT100 in the windings
+TEMP5 Redundant temperature
surveillance
12 x PT100 (two wire) in windings (Not
available with +LVB1 option)
Bearing temperature sensor * None
+BTMP1 PT100 in bearings Plug-in connector
Anti-condensation heaters * None
+HEAT1 One anti-condensation
heater
230VAC/130W
Marine classification * No marine classification
+CL1 ABS American Bureau of Shipping
+CL2 BV Bureau Veritas
+CL3 DNV
+CL4 LR Lloyd’s Register
+CL5 RINA
Conformity according to standards
The electric machine has been designed to be in conformity with the following directives and to meet the
requirements specified in the following standards:
Applicable Directives and standards
Standard Explanation
Low Voltage Directive
2006/95/EC (until 19.4.2016)
and Low Voltage Directive
2014/35/EU (from 20.4.2016
onwards)
Electrical equipment means any equipment designed for use with a voltage
rating of between 50 and 1000 V for alternating current. This electric
machine is subject to the Low Voltage Directive 2006/95/EC or 2014/35/EC.
IEC 60034-1:2010 Rotating electrical machines - Part 1: Rating and performance
User Guide
EM-PMI375
General information
10 |
©
Danfoss | November 2021 BC265856307805en-000202

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss EM-PMI375 and is the answer not in the manual?

Danfoss EM-PMI375 Specifications

General IconGeneral
BrandDanfoss
ModelEM-PMI375
CategoryPortable Generator
LanguageEnglish

Related product manuals