It is in some cases possible to make an exception from the limitations of the mounting
positions. Document Allowed bearing loads for EM-PMI machines DOC-000454 gives more
information about this. Contact Danfoss to obtain the document.
See Figures below for mounting limitations of the electric machine.
Allowed deviations from the horizontal mounting limitations
Line type Meaning
Allowed deviations from the horizontal mounting limitations, continuous operation. (Depicted from
the shaft end.)
Allowed deviations from the horizontal mounting limitations, for the maximum duration of 30% of
the work cycle. (Depicted from the shaft end.)
User Guide
EM-PMI375
Installation
©
Danfoss | November 2021 BC265856307805en-000202 | 37
To Next Page
Loading...