Danfoss EM-PMI375 - Page 70

(continued)
Part Number Description
12 Plate
13 Resolver adapter
14 Rotation sensor
15 Bolt socket head
16 Nut, lock
17 Washer
18 Spring, wave
19 Bearing shield
20 Bolt, socket head
21
Washer
22
Bolt, socket head
23
Washer
EM-PMI375-T200/T500/T800 Bearing kit (Non-insulated)
Quantity
(pcs)
Part Type Order
number
EM-PMI375-T200/T500/T800-BEARING-KIT-NON-INSULATED 11279474
1 Washer 55 x 68 x 3 | DIN 988
1 Nut, lock KM 11
1 Washer, locking (bearing nut) MB 11
1 Spring, wave LESJOFORS 4801
1 Seal, O-ring 99,1 x 2,4 NBR70
1 Bearing, deep groove ball (non-insulated),
Greased for life
SKF 6211 2RS1 C3 WT
1 Nut, lock KM11
1 Washer, locking (bearing nut) MB11
1 Seal, O-ring 99,1 x 2,4 NBR70
1 Bearing, deep groove ball (non-insulated),
Greased for life
SKF 6211 2RS1 C3 WT
2 Seal, radial lip, D-end (also N-end in +NE2) 50 x 65 x 8 | FKM,
TRELLEBORG,TREA00500-VCBVR
1 Seal, O-ring, D-end bearing shield 158,34 x 3,53 NBR70
1 Seal, gasket, N-end cover plate
5 Bolt, socket head M8 x 30 | DIN 912 | A4-80
5 Seal, washer Bonded seals, U 8,7 x 13 x 1
5 Bolt, socket head M8 x 25 | DIN 912 | A4-80
1 Wear sleeve Speedi sleeve SKF 99196
User Guide
EM-PMI375
Aftersales
70 |
©
Danfoss | November 2021 BC265856307805en-000202