Danfoss EM-PMI375 - Page 72

EM-PMI375-T200/T500/T800 Bearing kit (+BHS)
Quantity
(pcs)
Part Type Order
number
EM-PMI375-T200/T500/T800-BEARING-KIT-BHS 11279477
1 Washer 55 x 68 x 3 | DIN 988
1 Nut, lock KM 11
1 Washer, locking (bearing nut) MB 11
1 Bearing, deep groove ball (non-insulated),
Grease lubricated (BHS)
6211 C3
1 Spring, wave LESJOFORS 4801
1 Seal, O-ring 99,1 x 2,4 NBR70
1 Nut, lock KM11
1 Washer, locking (bearing nut) MB11
1 Bearing, deep groove ball (non-insulated),
Grease lubricated (BHS)
6211 C3
1 Seal, O-ring 99,1 x 2,4 NBR70
1 Seal, radial lip, N-end (BHS option) 72 x 72 x 8 | TRELLEBORG,
TRAB00520-4V012
2 Seal, radial lip, D-end (also N-end in +NE2) 50 x 65 x 8 | FKM,
TRELLEBORG,TREA00500-VCBVR
1 Seal, O-ring, D-end bearing shield 158,34 x 3,53 NBR70
1 Seal, gasket, N-end cover plate
1 Seal, O-ring, N-end bearing shield (BHS
option)
99,1 x 2,4 NBR70
5 Bolt, socket head M8 x 30 | DIN 912 | A4-80
5 Seal, washer Bonded seals, U 8,7 x 13 x 1
5 Bolt, socket head M8 x 25 | DIN 912 | A4-80
1 Wear sleeve Speedi sleeve SKF 99196
User Guide
EM-PMI375
Aftersales
72 |
©
Danfoss | November 2021 BC265856307805en-000202