Danfoss EXD 316

Principle
Instructions
AK-PC 572
Identification
Power supply
AK-PC 572
080G0320
24 V a.c. / d.c. 17 VA
EXD 316
084B8042
24 V a.c. / d.c. 10 VA
1.5 m: 080G0075
3.0 m: 080G0076
MMIGRS2
080G0294
RI8SR1ML 2019-01
IP 20
-20 - 60°C
(0 - 140°F)
RH max. 90% non condensing
AK-PC 572 17 VA
EXD 316, HP 10 VA
EXD 316, rec 10 VA
Stepper valve, HP _ _VA
Stepper valve rec. _ _VA

Danfoss EXD 316 Specifications

General

Brand	Danfoss
Model	EXD 316
Category	Controller
Language	English

Summary

Module Connections and Wiring

Upper and Lower Level Connections

Illustrates wiring for AK-PC 572, Vhp, Vrec, and EXD 316 modules, including Modbus and CANBUS.

Main Module Details

Analog Outputs (AO)

Details AO connections for frequency converters or EC motors, including voltage and polarity.

Analog Inputs (AI)

Covers connections for pressure transmitters and temperature sensors.

Canbus and Modbus Communication

High Pressure Module (Address 96)

Receiver Module (Address 97)

Power Supply and Battery

Module Addressing and Reset Procedure

Setting Module Addresses

Provides a step-by-step procedure to set unique addresses (96 and 97) for valve modules.

Resetting Incorrect Addresses

Details the procedure to reset module node IDs if addressing fails.

Checking Active Node Addresses

Describes how to verify module addresses using the controller's 'ACTIVE NODES' display.