Danfoss FP735Si

Danfoss Heating
17
GB
This does not reset any programmes or the time or date, but will
cancel any manual overrides that have been selected.
11.2 Full Reset
1) Go to Advanced Programming: press and hold PROG and V for 5
seconds.
2) Press and hold PROG and press/release R/S.
At a Full Reset:
• Event times are reset to their default values (section 5.2).
• Next event overrides are cancelled.
• +HRS overrides are cancelled.
• Pre-programmed Parameters (see 5.1) are reset to default values.
• Time and date are not changed.