Danfoss Heating
5
GBGB
3.1 First remove the wallplate from the back of the unit.
3.2 From the top left hand corner of the wallplate, there must be
clearances of at least 21mm to the right, 21mm to the left, 36mm
above and 106mm below in order to mount the plug-in module.
3.3 Wiring
Note: A typical system wiring example is shown on page 18
3.0 Installation
3 on
L
N
2 on
2 off
1 on 1 off
To Next Page
Loading...
