5
VIFZA35X © Danfoss 02/2011
Ambient temperature
Floor temperature
Communication/link test
Battery warning
Tamper proof, locked by CC
The Danfoss Link™ RS (Room Sensor) has a built-in tem-
perature sensor, which measures the ambient temperature.
It allows you to control the heating, based on room tem-
perature in the room where installed. With the Danfoss
Link™ RS you can also adjust the temperature.
LED button for
display light on/off
and for network test
Temperature up
Display (backlit) Temperature down
The RS Room Sensor is battery powered - 2 x AA - and can
thus be placed everywhere it fits the interior design.
Introduction
Display symbols
GB
Installation Guide Danfoss Link™ RS
To Next Page
Loading...
