Danfoss Link RS User Manual

7
VIFZA35X © Danfoss 02/2011
Installation
1. Turn the device around so the
back is facing you.
2. Remove the back panel by gently
pressing your thumbs on the
panel and pull downwards.
3. Fix the back panel to the wall
either help of screws or adhesive
on the desired destination.
4. Insert the batteries.
5. Install the Danfoss Link™ RS front
by gently letting it slide on the
back panel again.
GB
Installation Guide Danfoss Link™ RS

Danfoss Link RS Specifications

General

Brand	Danfoss
Model	Link RS
Category	Accessories
Language	English