Danfoss PFM 5001 User Manual

Creating
new project
(continued)
3. Check Common valve box
or uncheck, if it is not
present in the project.
4. Select Common valve
manufacturer and type in
checked state. Fill Initial
presetting of the common
valve.
5. You can measure Input
pressure using the Measure
icon in its line.
The calculated Common
valve presetting can be
viewed in the Presetting
Window at the end of project
balancing.
6. Select the Branch tab.
Click on Menu button and
Add branch button.
34 HEC

Danfoss PFM 5001 Specifications

General

Brand	Danfoss
Model	PFM 5001
Category	Measuring Instruments
Language	English