TP4000
8
GB
FR
ES
NL
GR
PL
CZ
TR
HR
RO
HU
LT
a) Press PROG until 1st pre-set time and
temperature appears in display.
b) Use + or – buttons to adjust the TIME
(press and hold to change in 10 min
increments).
c) Use Λ or V buttons to adjust the
TEMPERATURE.
d) Press PROG to move to next preset time &
temperature (Event 2).
e) Repeat steps b, c & d for programming
Events 3, 4, 5 & 6.
Note: Press and hold PROG at any time will
make the unit return to RUN mode.
2.3 Running your programme
Press PROG – the colon in the LCD display
will start to fl ash. The heating will now be
controlled with the programmed times and
temperatures.
2.4 User Overrides
Sometimes you may need to change the way you use your heating
temporarily, e.g. due to unusually cold weather. The TP4000 has several
user overrides, which can be selected without aff ecting the thermostat
programming.
GB
2.2 Changing the preset programmes
To Next Page
Loading...
